Evaluation Board User Guide
UG-082
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluation Board for Dual High Speed Operational Amplifiers
(16-Lead, 4 mm × 4 mm LFCSP with Dedicated Feedback Pin)
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 8
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
Two independent circuits enhance flexibility
GENERAL DESCRIPTION
The EB-O16CP44-2Z is designed to aid in the evaluation of dual
high speed operational amplifiers. The EB-O16CP44-2Z is a bare
board (that is, there are no components soldered to the board) that
enables users to quickly prototype a variety of operational amplifier
circuits, which minimizes risk and reduces time to market. The
EB-O16CP44-2Z evaluation board supports any of the Analog
Devices, Inc., dual high speed operational amplifiers in 16-lead,
4 mm × 4 mm lead frame chip scale packages (LFCSP) with
dedicated feedback pins.
Figure 1 and Figure 2 show the component side and the circuit
side of the evaluation board, respectively. Figure 3 shows the
evaluation board schematic.
The 4-layer evaluation board accepts edge-mounted SMA con-
nectors on both inputs and outputs, which allows efficient and
quick connection to test equipment or other circuitry.
The board ground plane, component placement, and power
supply bypassing are optimized for maximum circuit flexibility
and performance. The evaluation board uses a variety of SMT
component case sizes: 0402, 0508, 0603, and 7343.
Figure 4 and Figure 6 show the evaluation board assembly
drawings. The metal layout pattern for connecting the board to
the op amp and to the supporting circuitry is shown in Figure 5
and Figure 7.
EVALUATION BOARD COMPONENT AND CIRCUIT SIDE DIAGRAMS
08776-
001
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELING
ON YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE.
08776-
007
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELING
ON YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 1. EB-O16CP44-2Z Component Side of PCB
Figure 2. EB-O16CP44-2Z Circuit Side of PCB