UG-1134
EVAL-ADAU1467Z
Rev. A (Draft) | Page 18 of 55
Figure 44. Self Boot Slide Switch, S3
To configure the operation of the multipurpose pins, navigate to
the
MULTIPURPOSE
tab in the
Hardware Configuration
tab
in
Figure 45. Multipurpose Pin Configuration in
Figure 46. Multipurpose Pin Function Selection Switch, S8
Table 3. Multipurpose Pins and Hardware Access Points
Multipurpose
Pin
Connection
Access Point
LRCLK_OUT1/MP5
Input to inverter (LED D4)
TP56
LRCLK_OUT3/MP9
Input to inverter (LED D3)
TP48
LRCLK_IN1/MP11
Input to inverter (LED D5)
TP29
LRCLK_IN2/MP12
Pin multiplexed with LRCLK_IN2
Header J3, Pin 4
LRCLK_IN3/MP13
Pin multiplexed with LRCLK_IN3
Header J2, Pin 4
SDATAIOx / MPx
Mic Canvas Header J5, Pin X
Verify with schematics
STATUS LEDs
Six status LEDs provide information about the state of the EVAL-
ADAU1467Z evaluation board (see Figure 47). For additional
information pertaining to the status LEDs, see Table 6.
15786-
069
DRAFT