Analog Devices SHARC ADSP-214 Series, Hardware Reference Manual, Page: 86 / 1192

DMA Channel Registers
2-8 ADSP-214xx SHARC Processor Hardware Reference
Extended DMA Parameter Registers
This section describes the enhanced parameter registers used for Accelera-
tor and External Port.
Base registers. These registers, shown in Table 2-6 , base registers indicate
the start address of the circular buffer to be transferred to/from memory
on the corresponding DMA channel.
Length registers. These registers, shown in Table 2-7 , define the length of
the circular buffer to be transferred to/from memory on the corresponding
DMA channel.
CPFIR 20 Accelerator FIR
CPIIR 20 Accelerator IIR
CPIFFT 21 Accelerator FFT input
CPOFFT 20 Accelerator FFT output
CPEP0–1 21 External Port
Table 2-6. Base Registers
Register Name Width (Bits) Description
IBFIR 19 Accelerator FIR input
OBFIR 19 Accelerator FIR output
IBIIR 19 Accelerator IIR input
OBIIR 19 Accelerator IIR output
IBFFT 19 Accelerator FFT input
OBFFT 19 Accelerator FFT output
EBEP0–1 28 External Port (external base)
Table 2-5. Chain Pointer Registers (Cont’d)
Register Name Width (Bits) Description
www.BDTIC.com/ADI