3
dc2070afa
DEMO MANUAL DC2070A
SCHEMATIC DIAGRAM
Figure 2. High Signal Level Active Mixer
5. Set the two RF signal generators to provide one
1949MHz CW signal and one 1951MHz CW signal.
The signals should be applied to the 0° combiner. The
power applied to the DC2070A’s RF input port should
be about –3dBm/tone.
6. Perform various measurements (conversion gain, IP3,
LO leakage, etc.).
7. To turn off the DC2070A, either turn off the power sup-
ply’s output, or remove the power leads starting with
the EN lead.
QUICK START PROCEDURE
