Analog Devices EZ-KIT Lite ADSP-BF533, Manual, Page: 55 / 108

ADSP-BF533 EZ-KIT Lite Evaluation System Manual 2-15
Using EZ-KIT Lite
Reading Trace Buffer Data
The first column between the square brackets (in blue) indicates the line
number in the
Trace window.
The second column between square brackets, which comes in vertical
pairs, shows the trace number. For each discontinuity, the first (top posi-
tion) is the source trace, and the second (bottom position) is the
destination trace. The third column in between square brackets shows the
addresses of the instructions. Each address is followed by the assembly
instruction.
The trace grows upward. In Figure 2-1 on page 2-14 , trace 0 occurred
before trace 1, which occurred before trace 2, and so on.
Performance Monitor
Choosing Performance Monitor from the Settings menu opens the Per-
formance Monitor Control dialog box shown in Figure 2-2 . A description
of the dialog box appears in Table 2-10 on page 2-16 .
Figure 2-2. Performance Monitor Dialog Box