Analog Devices EVAL-CN-304-SDZ User Manual Download Page 3

Page: 3 / 12

EVAL-CN-304-SDZ Evaluation Board User Guide

UG-266

Rev. B | Page 3 of 12

EVALUATION BOARD SOFTWARE

INSTALLING THE SOFTWARE

The

EVAL-CN-304-SDZ

evaluation kit includes the software and

drivers on a CD. The software is compatible with Windows® XP,
Windows Vista, and Windows 7.
To install the software, follow these steps:
1.

Install the software before connecting the

EVAL-SDP-CB1Z

board to the USB port of the PC.

Start the Windows operating system and install the
software from the

EVAL-CN-0304-SDZ

evaluation kit CD.

After installation of the software and drivers is complete,
plug the

EVAL-CN-304-SDZ

into the

EVAL-SDP-CB1Z

board, and then plug the

EVAL-SDP-CB1Z

board into the

PC using the USB cable included in the box.

When the software detects the evaluation board, proceed
through any dialog boxes that appear to finalize the
installation (

Found New Hardware Wizard

Install the

Software Automatically

and so on).

09791-

003

Figure 2. Hardware

Device Manager

Window with the

EVAL-SDP-CB1Z

Board Plugged In

Summary of Contents for EVAL-CN-304-SDZ













Search results

Summary of Contents for EVAL-CN-304-SDZ

Reviews:

Related manuals for EVAL-CN-304-SDZ

Brands by name

Popular brands

Analog Devices EVAL-CN-304-SDZ, User Manual

Search results

Summary of Contents for EVAL-CN-304-SDZ

Reviews:

Related manuals for EVAL-CN-304-SDZ

Brands by name

Popular brands