EVAL-ADuMQSEBZ User Guide
UG-042
One
Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluating the 16-Lead SOIC and the 16-Lead QSOP Digital Isolators
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. C | Page 1 of 8
FEATURES
Convenient connections for power through screw
terminal blocks
Add-on BNC connector for 50 Ω signal sources
On-board signal routing
Support for signal wrap back
Simple signal paths to reduce transmission line effects
Pull-up and pull-down provided for control lines
Support for
iso
Power
Project area that supports surface-mount and through-hole
devices
GENERAL DESCRIPTION
The
can be used with most
i
Coupler®
isolation products in the 16-lead, wide-body SOIC and QSOP
packages. The evaluation board supports the common pad
positions for power, ground, and input/output pins found in
nearly all of the
i
Coupler products and is a configurable board
that can be adapted to many
i
Coupler products.
SUPPORTED
i
COUPLER MODELS
EVALUATION BOARD
Figure 1.
08414-
001
