UG-1926
Rev. 0 | Page 8 of 20
CMSIS PACK IN KEIL μVISION5
After the Keil μVision5 IDE is installed, open the application
and use the following steps to properly set up the
device from the IDE:
1.
Open the CMSIS pack installer as shown in Figure 6.
When the pack installer is opened for the first time, it may
take a few minutes to update the pack installer.
25844
-105
Figure 6. Pack Installer
2.
After the CMSIS pack installer opens, click
File
>
Import
.
Select and import the ADuCM420 pack that is included in
the installation setup (see Figure 7).
3.
With the ADuCM420 CMSIS pack installed, the
ADuCM420 device is supported by the Keil μVision5 IDE.
The
ADuCM420
appears in the
Device
tab of the Keil
window, as shown in Figure 8.
258
44-
10
6
Figure 7. Pack Installer
2584
4-
10
7
Figure 8.
ADuCM420
Device in Keil μVision5
