UG-1256
Rev. 0 | Page 5 of 9
ACQUIRING DATA
SELECTING THE PROPER VIEW
The EVAL-ADPD188GGZ is intended for wrist-based PPG
measurements. Select the
ADPD Device
data view (see Figure 10).
This view opens a window that allows the user to run the
device and collect data (see Figure 12).
16617-
010
Figure 10. Select
ADPD Device
LOAD CONFIGURATION
In the upper right corner of the data view window, click the
ADPD Config
button to open the
ADPD Config
view (see
Figure 11). Click
Load DCFG
to select a configuration file.
For PPG measurements, select the
ADPD188Normal.dcfg
configuration file.
16617-
0
1
1
Figure 11.
ADPD Config
View
