UG-1141
User Guide
Rev. 0 | Page 6 of 12
BLOCK DIAGRAM AND DESCRIPTION
The EVAL-ADGS5412SDZ software is organized so that it
appears similar to the functional block diagram shown in the
data sheet. In this way, it is easy to correlate the
functions on the EVAL-ADGS5412SDZ board with the
description in the data sheets. A full description of each block,
register, and setting is given in the
data sheet.
Some of the blocks and their functions are described here as
they pertain to the evaluation board. The full screen block
diagram, shown in Figure 4, describes the functionality of each
Figure 4. EVAL-ADGS5412SDZ Block Diagram with Labels
Table 3. Block Diagram Functions
Label Function
A
The dropdown menus configure SW1 to SW4 as open or closed.
B
The
INVALID RW ENABLE
,
SCLK COUNT ENABLE
, and
CRC ENABLE
checkboxes enable or disable the error detection
features on the SPI interface.
C
The
BURST MODE ENABLE
checkbox enables or disables burst mode.
D
The
RW ERROR FLAG
,
SCLK ERROR
, and
CRC ERROR FLAG
indicators illuminate red if the relevant error flags assert in the
error flags register.
E
The
Clear Flags
button clears the error flags register.
F
The
Apply Changes
button applies all modified values to the devices.
F
A
B
D
E
C
158
96-
00
4
