Analog Devices EVAL-ADF4150EB1Z, User Manual, Page: 5 / 24

Evaluation Board User Guide UG-380
Rev. 0 | Page 5 of 24
EVALUATION BOARD SETUP PROCEDURE
SOFTWARE INSTALLATION
Use the following steps to install the software.
1.
Install the Analog Devices ADF4150 software by double-
clicking ADF4150 Setup.msi .
If you are using Windows XP, follow the instructions in the
Windows XP Software Installation Guide section (see
Figure 3 to Figure 7).
If you are using Windows Vista or Windows 7, follow the
instructions in the Windows Vista and Windows 7 Software
Installation Guide section (see Figure 8 to Figure 12).
Note that the software requires Microsoft Windows
Installer and Microsoft .NET Framework 3.5 (or higher).
The installer connects to the Internet and downloads
Microsoft .NET Framework automatically. Alternatively,
before running the
ADF4150 Setup.msi , both the installer
and .NET Framework can be installed from the CD
provided.
2. Connect your board by USB.
If you are using Windows XP, follow the steps in the
Windows XP Driver Installation Guide section (see Figure 13
to Figure 16).
On Windows Vista or Windows 7, the drivers install
automatically.
Windows XP Software Installation Guide
10552-
003
Figure 3. Windows XP ADF4150 Software Installation, Setup Wizard
1. Click Next .
10552-
004
Figure 4. Windows XP ADF4150 Software Installation, Select Installation
Folder
2. Choose an installation directory and click Next.