UG-1870
Rev. 0 | Page 3 of 15
EVALUATION BOARD QUICK START GUIDE
To quickly evaluate the
ADC, take the following
steps:
1.
Download and install the
software from the
AD7606C-18 product page or the ACE software page.
When installing the ACE software, ensure that the
disconnected from the USB port of the PC. Restart the PC
after the installation process completes. For complete
software installation instructions, see the Software
Installation section.
2.
Ensure that the link options are configured as detailed in
Table 2.
3.
Connect the SDP-H1 to the EVAL-AD7606C18FMCZ. By
default, the power for the EVAL-AD7606C18FMCZ is
supplied by the SDP-H1. See the Power Supplies section
for the available power options.
4.
Connect the SDP-H1 to the 12 V supply (included in the
SDP-H1 kit) and to the PC via the USB cable. If prompted
by the operating system, choose to automatically search for
the drivers for the SDP-H1.
5.
Launch the ACE software from the following location:
C:\Program Files
(x86)\Analog Devices
\
ACE
.
6.
Connect an input signal via the Channel 1 to Channel 8
terminal blocks or the Subminiature Version B (SMB)
connectors, J1 to J8.
