UG-371
EVAL-AD7492SDZ User Guide
Rev. 0 | Page 8 of 24
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
The
EVAL-AD7492SDZ
evaluation kit includes software on a
CD. Click the
setup.exe
file from the CD to run the installation.
The default location for the software is
C:
\
Program
Files
\
Analog Devices
\
AD7492
.
Install the evaluation software before connecting the evaluation
board and the
EVAL-SDP-CB1Z
board to the USB port of the
PC to ensure that the evaluation system is correctly recognized
when connected to the PC.
There are two parts to the installation:
1.
EVAL-AD7492SDZ
evaluation board software install
2.
EVAL-SDP-CB1Z
SDP board drivers install
Figure 5 to Figure 9 show the steps to take to install the
EVAL-
AD7492SDZ
evaluation software. Figure 10 to Figure 13 show
the steps to take to install the
EVAL-SDP-CB1Z
drivers. Proceed
through all of the installation steps allowing the software and
drivers to be placed in the appropriate locations. Until the software
and drivers have been installed, do not connect the
EVAL-SDP-
CB1Z
board to the PC.
10493-
005
Figure 5.
AD7492
Install Window 1 (
Yes
)
10493-
006
Figure 6.
AD7492
Install Window 2 (Choose Destination)
10493-
007
Figure 7. Install Window 3 (
I accept the License Agreement. Next >>
)
10493-
008
Figure 8.
AD7492
Install Window 4 (
Next >>
)
10493-
009
Figure 9.
AD7492
Install Window 5 (
Next >>
)
