Analog Devices EVAL-AD7383FMCZ, User Manual

Page: 7 / 16

EVAL-AD7383FMCZ Evaluation Board User Guide UG-1770
Rev. A | Page 7 of 16
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION PROCEDURES
Download the ACE software from the ACE software page or the
AD7383 product page. Install ACE on a PC before using the
EVAL-AD7383FMCZ.
The ACE installation process in the Installing the ACE Software
section includes the ACE software installation and the
SDP-H1
driver installation.
Install the ACE software and SDP-H1 drivers before connecting
the EVAL-AD7383FMCZ and the SDP-H1 to the USB port of the
PC to ensure that the evaluation system is properly recognized
when it is connected to the PC.
Installing the ACE Software
To install the ACE software, take the following steps:
1. Download the ACE software to a Windows®-based PC.
2. Double click the ACEInstall.exe file to begin the installation.
By default, the software is saved to the following location:
C:\Program Files (x86)\Analog Devices\ACE .
3. A dialog box opens asking for permission to allow the
program to make changes to the PC. Click
Yes to begin the
installation process.
4. In the
ACE Setup
window, click
Next >
to continue the
installation (see Figure 4).
233
97-
004
Figure 4. ACE Software Installation Confirmation
5. Read the software license agreement and click I Agree
(see Figure 5).
23
397
-00
5
Figure 5. License Agreement
6. Click Browse … to choose the installation location and
then click Next > (see Figure 6).
23
39
7
-00
6
Figure 6. Choose Installation Location