Evaluation Board User Guide
UG-478
Rev. 0 | Page 19 of 40
DC Waveform Capture
The waveforms resulting from the gathered samples are shown
in the top graph of the window. The right hand side of the window
indicates which channel is selected and the value of the last sample
of the batch. The conversions can be displayed as codes or as volts.
DC Testing—Histogram
The histogram resulting from the gathered samples is shown in
the bottom graph. Parameters such as peak-to-peak noise and
rms noise are displayed to the right of the graph in the
Analysis
Results
section for the current batch of samples.
Figure 23. Waveform and Histogram Analysis
1
1035-
020