EVAL-AD7175-2SDZ User Guide
UG-AD7175-2
Figure 10. Register Map Tab of the
Evaluation Board Software
REGISTER MAP TAB (22)
Register Tree (23)
This control show the full register map in a tree control. Each
register is shown and clicking on the expand button next to
each register will show all the bitfields contained within that
register.
Register Control (24)
This control allows the user to change the individual bit of the
register selected in the Register Tree (23) by clicking on them or
program the register value directly into the number control on
the right.
Bitfield List(25)
This list shown all the bitfields of the register selected in the
Register Tree (23). The values can be changed using the drop
down menu or directly entering a value into the number control
on the right.
Documentation (26)
This field contains the documentation for the register of bitfield
selected in the Register Tree (23).
Save & Load (27 & 28)
These buttons allow the user to save the current register map
setting to a file and load the setting from the same file.
EXITING THE SOFTWARE
To exit the software, click the close button at the top, right
corner of the main window (see Figure 7).
Rev. Pr.C | Page 11 of 12
