UG-753
EVAL-AD5592RSDZ User Guide
GETTING STARTED
INSTALLING THE SOFTWARE
The evaluation kit for the
AD5592R
includes self-installing
software on a CD. The software is compatible with
Windows® XP, Windows Vista (32-bit version), and Windows 7
(32- and 64-bit versions). The software must be installed before
connecting the
SDP-B
board to the USB port of the PC to
ensure that the
SDP-B
board is recognized when it is connected
to the PC.
To install the software, take the following steps:
1.
Start the Windows operating system and insert the CD.
2.
The installation software opens automatically. If it does not
open automatically, run the setup.exe file from the CD.
3.
After installation is complete, power up the evaluation
board as described in the Power Supplies section.
4.
Connect the evaluation board to the
SDP-B
board, and
connect the
SDP-B
board into the PC using the USB cable
included in the box.
5.
When the software detects the evaluation board, proceed
through any dialog boxes that appear to finalize the installation.
EVALUATION BOARD SETUP PROCEDURES
1.
Connect the evaluation board to the
SDP-B
board, and
connect the USB cable from the
SDP-B
board to the PC.
2.
Power the
SDP-B
and evaluation boards by connecting 6 V
to the J3 connector.
Rev. 0 | Page 4 of 13