Analog Devices EVAL-AD4115SDZ, User Manual

Page: 7 / 24

EVAL-AD4115SDZ User Guide UG-1820
Rev. 0 | Page 7 of 24
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION PROCEDURES
The EVAL-AD4115SDZ evaluation kit includes a link to the
software that must be installed before using the EVAL-
AD4115SDZ.
The following two installations are required:
•
AD411x Eval+ software installation
•
SDP drivers installation
The AD411x Eval+ evaluation software and drivers must be
installed before connecting the EVAL-AD4115SDZ and SDP
board to the USB port of the PC to ensure that the PC correctly
recognizes the evaluation system.
Installing the AD411x Eval+ Software
To install the AD411x Eval+ software, take the following steps:
1. With the SDP board disconnected from the USB port of
the PC, download and unzip the AD411x Eval+ software
installer file from the EVAL-AD4115SDZ product page.
2. Double-click the setup.exe file to begin the evaluation
board software installation. The software then installs to
the following default location:
C:\Program Files
(x86)\Analog Devices\AD4\ .
3. A dialog box appears asking for permission to allow the
program to make changes to the PC. Click
Yes (see
Figure 3).
23999-
003
Figure 3. Granting Permission for the Program to Make Changes to PC
4. Select a location to install the software and then click Next .
Figure 4 shows the default locations displayed when the
dialogue box opens, but another location can be selected by
clicking
Browse .
23999-
004
Figure 4. Selecting the Location for Software Installation
5. A license agreement appears. Read the agreement, select I
accept the License Agreement , and click Next .
23999-
005
Figure 5. Accepting the License Agreement
6. A summary of the installation displays. Click Next to
continue.
23999-
006
Figure 6. Reviewing a Summary of the Installation