SigmaDSP
TM
28-/56-Bit Audio Processor
Evaluation Boards
EVAL-AD1940EB/AD1941EB
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
EVALUATION BOARD OVERVIEW
This document explains the design and setup of the
AD1940/AD1941 SigmaDSP evaluation boards.
The AD1940EB/1941EB provide a full range of analog and
digital inputs and outputs to and from the AD1940/AD1941.
The SigmaDSP can connect to analog I/O signals through the
AD1939 codec and AD1871 ADC. Digital I/O connections are
available in both S/PDIF and 3-wire serial data formats. The
DSP is controlled by Analog Devices’ SigmaStudio
TM
software,
which interfaces to the evaluation boards with either a USB or
parallel port connection. USB control is available via the EVAL-
ADUSB1 add-on board. Power is distributed by a single supply,
which is regulated to the necessary voltages on the boards. The
PCB is an 8” × 7 ¾” 4-layer design with split analog and digital
power and ground planes on the two inner layers.
PACKAGE CONTENTS
The AD1940EB/AD1941EB packages contain these items:
•
AD1940/AD1941 evaluation board
•
EVAL-ADUSB1 USB adapter
•
SigmaStudio software CD
•
Universal power supply
•
USB cable
•
Evaluation board/software quick-start guide
AD1940/AD1941 DEVICE DESCRIPTION
The AD1940/AD1941 are complete 28-bit, single-chip,
multichannel audio DSPs for equalization, multiband dynamic
processing, delay compensation, speaker compensation, and
image enhancement. These algorithms can be used to
compensate for the real-world limitations of speakers,
amplifiers, and listening environments, resulting in a dramatic
improvement of perceived audio quality.
(continued on Page 3)
BLOCK DIAGRAM
OUTPUT
PLD
(SIGNAL
ROUTING)
INPUT
PLD
(SIGNAL
ROUTING)
AD1940/
AD1941
PERFORMANCE AUDIO
DSP
EXTERNAL DIGITAL
(I
2
S OUTPUTS)
SPI/I
2
C
INTERFACE
EXTERNAL DIGITAL
(I
2
S INPUT)
POWER SUPPLY
REGULATION
S/PDIF
RECEIVER AND
TRANSMITTER
AD1939
CODEC
AD1871
ADC
ANALOG OUTPUTS
ANALOG INPUTS
05
88
0-
0
01
Figure 1.
Summary of Contents for EVAL-AD1940EB
