Analog Devices EV-ADF5356SD1Z, User Manual

Page: 3 / 19

EV-ADF5356SD1Z User Guide UG-1087
Rev. 0 | Page 3 of 19
GETTING STARTED
SOFTWARE INSTALLATION PROCEDURES
See the ADF5356 product page for the EV-ADF5356SD1Z control
software. For the software installation procedure, see the PLL
Software Installation Guide .
EVALUATION BOARD SETUP PROCEDURES
To run the software,
1. Click the ADF5356 file on the desktop or from the Start
menu.
2. On the
Select Device and Connection
tab, click
ADF5356
and SDP board (black) , and then click Connect (see
Figure 2).
3. When connecting the board, allow 5 sec to 10 sec for the
label on the status bar to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
Figure 2. Software Front Panel Display—Select Device and Connection
1536
1-
002