UG-161
EV-ADF411XSD1Z User Guide
Rev. A | Page 10 of 28
INSTALLING THE FRAC-N PLL SOFTWARE
Use the following steps to install the SDP drivers and the
Analog Devices Frac-N PLL software.
1.
Install the Frac-N PLL software by double-clicking
ADI_PLL_Frac-N_Setup.msi
.
If you are using Windows XP, follow the instructions in
the Windows XP Int-N PLL Software Installation Guide
section (see Figure 17 to Figure 21).
If you are using Windows Vista or Windows 7, follow the
instructions in the Windows Vista and Windows 7 Frac-N
PLL Software Installation Guide section (see Figure 22 to
Figure 26).
Note that the software requires Microsoft Windows
Installer and Microsoft .NET Framework 3.5 (or higher).
The installer connects to the Internet and downloads
Microsoft .NET Framework automatically. Alternatively,
before running
ADI_PLL_Frac-N_Setup.msi
, both the
installer and .NET Framework can be installed from the
CD provided in the evaluation board kit.
2.
Connect the SDP board (black) to a PC using the supplied
USB cable.
If you are using Windows XP, follow the steps in the Windows
XP SDP-S Board Driver Installation Guide section (see
Figure 27 to Figure 30).
If you are using Windows Vista or Windows 7, the drivers
install automatically.
Windows XP Frac-N PLL Software Installation Guide
1.
Click
Next
.
Figure 17. Windows XP Frac-N PLL Software Installation, Setup Wizard
2.
Choose an installation directory and click
Next
.
Figure 18. Windows XP Frac-N PLL Software Installation,
Select Installation Folder
3.
Click
Next
.
Figure 19. Windows XP Frac-N PLL Software Installation,
Confirm Installation
09146-
103
09146-
104
09146-
105
Summary of Contents for EV-ADF411XSD1Z
Page 23: ...EV ADF411XSD1Z User Guide UG 161 Rev A Page 23 of 28 Figure 41 Layer 2 Ground Plane 09146 025...
Page 24: ...UG 161 EV ADF411XSD1Z User Guide Rev A Page 24 of 28 Figure 42 Layer 3 Power Plane 09146 026...
Page 25: ...EV ADF411XSD1Z User Guide UG 161 Rev A Page 25 of 28 Figure 43 Layer 4 Solder Side 09146 027...
