Analog Devices Blackfin EZ-Extender 82-000845-01, Manual

Page: 29 / 48

Blackfin USB-LAN EZ-Extender Manual 2-3
USB-LAN EZ-Extender Hardware Reference
Jumper Setting
Before using the Blackfin USB-LAN EZ-Extender, follow the steps in
“USB-LAN EZ-Extender Setup” on page 1-1 .
Figure 2-2 shows the locations of all jumper headers. A two-pin jumper
can be placed on the respective jumper header for different functionality.
The following sections describe all possible jumper settings and associated
functionality.
Power Select Jumper (JP1)
The power select jumper,
JP1
, by default, must have no jumpers on any of
its pins. Jumpers can be used only when the extender is plugged into an
ADSP-BF537 EZ-KIT Lite.
Figure 2-2. Jumper Locations
www.BDTIC.com/ADI