ADZS-BF707-BLIP2 Board Evaluation System Manual
1-7
Using ADZS-BF707-BLIP2 Board
10 days of unrestricted use and then becomes disabled. The license can be
re-enabled by activation. Once activated, the evaluation license offers
unrestricted use for a defined period and then becomes disabled until an
additional license is installed.
If installing CCES without using a serial number, you will be lim-
ited to 180 days.
An evaluation license can be upgraded to a full license. Licenses can be
purchased from:
• Analog Devices directly. Call (800) 262-5645 or 781-937-2384 or
go to:
http://www.analog.com/buyonline
.
• Analog Devices, Inc. local sales office or authorized distributor. To
locate one, go to:
Mobile DDR Memory
The ADSP-BF707 processor connects to a 2Gb Micron MT46H128M16
chip through the Double Data Rate Synchronous Dynamic Ran-
dom-Access Memory controller. The memory controller on the processor
and the Mobile DDR memory chip are powered by the on-board 1.8V
regulator. The memory controller on the processor can operate at a maxi-
mum clock frequency of 200 MHz. Data is transferred between the
processor and the memory chip on both the rising and falling edges of the
clock.
With a CCES session running and connected to the BLIP2 board through
an emulator, the memory controller registers are configured automatically
each time the processor is reset through a soft reset using CCES. The val-
ues are used whenever mobile DDR chip is accessed through the debugger
(for example, when viewing memory or loading a program).
Summary of Contents for ADZS-BF707-BLIP2
