ADV8005 Hardware Reference Manual
UG-707
32 kHz
Pixel Clock (MHz)
N
CTS
148.5/1.001
11648
421875
148.5
4096
148500
Other
4096
Measured
Table 62: Recommended N and Expected CTS Values for 44.1 kHz and Multiples
44.1kHz
88.2 kHz
176.4 kHz
Pixel Clock (MHz)
N
CTS
N
CTS
N
CTS
25.2 / 1.001
7007
31250
14014
31250
28028
31250
25.2
6272
28000
12544
28000
25088
28000
27
6272
30000
12544
30000
25088
30000
27 * 1.001
6272
30030
12544
30030
25088
30030
54
6272
60000
12544
60000
25088
60000
54 * 1.001
6272
60060
12544
60060
25088
60060
74.25 / 1.001
17836
234375
35672
234375
71344
234375
74.25
6272
82500
12544
82500
25088
82500
148.5 / 1.001
8918
234375
17836
234375
35672
234375
148.5
6272
16500
12544
16500
25088
16500
Other
6272
Measured
12544
Measured
25088
Measured
Table 63: Recommended N and Expected CTS Values for 48 kHz and Multiples
48 kHz
96 kHz
192 kHz
Pixel Clock (MHz)
N
CTS
N
CTS
N
CTS
25.2 / 1.001
6864
28125
13728
28125
27456
28125
25.2
6144
25200
12288
25200
24576
25200
27
6144
27000
12288
27000
24576
27000
27 * 1.001
6144
27027
12288
27027
24576
27027
54
6144
54000
12288
54000
24576
54000
54 * 1.001
6144
54054
12288
54054
24576
54054
74.25 / 1.001
11648
140625
35672
140625
46592
140625
74.25
6144
74250
12288
74250
24576
74250
148.5 / 1.001
5824
140625
17836
140625
23296
140625
148.5
6144
148500
12288
148500
24576
148500
Other
6144
Measured
12288
Measured
24576
Measured
6.11.5.
Audio Sample Packets
By setting
to a value greater then 2 (that is, 3 channel or more), the eight channel audio packet format will be used. The I2S can
be routed to different subpackets using the following fields:
•
subpkt0_l_src
•
subpkt0_r_src
•
subpkt1_l_src
•
subpkt1_r_src
•
subpkt2_l_src
•
subpkt2_r_src
•
subpkt3_l_src
•
subpkt3_r_src
The
must be set to a speaker mapping that corresponds to the I2S input stream to subpacket routing. Using SPDIF has a default
setting of two channels.
Rev. A | Page 225 of 317