UG1022
ADUX1020-EVAL-SDP User Guide
Rev. 0 | Page 4 of 9
14766-
006
Figure 6. Running the Channel Auto Calibration
STREAMING DATA
Press the
Play
button to begin streaming data from the evaluation
board. Move an object or hand within 15 cm above the
ADUX1020
to see the corresponding output of the device on the graphs. The
Y
Ratio vs X Ratio
graph shows the calculated x, y position of the
object above the device (see Figure 7). The
Intensity
graph shows
the average intensity of reflected light seen by the device,
represented in ADC codes.
14766-
007
Figure 7. Graph of Streaming Data
GESTURE RECOGNITION
To view the gesture recognition capability, navigate to the
Gesture
Analysis Algorithm
tab and select
LSLF Swipe determination
from the drop-down menu. Click the
Play
button if the device
is not already streaming data.
Move a hand within 15 cm above the device and swipe in any of
the four indicated directions. Alternatively, the center indicator
can be activated by quickly lowering a hand towards the sensor
(see Figure 8).
14766-
008
Figure 8.
Gesture Recognition Algorithm
Tab
For more detailed information
Optical Gesture Evaluation Tool
and additional features of the software, see the
Optical Gesture
Evaluation Tool User Manual
, which can be found in the
Help
>
Help Topics
menu.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
