1. Connect the EZ-KIT board to a personal computer (PC) running
IAR Embedded WorkBench
, using a J-
Link/J-Trace emulator:
a. Plug one side of the USB cable into the USB connector of the emulator. Plug the other side into a USB
port of the PC running
IAR Embedded WorkBench
.
b. Attach the emulator to the header connector,
P1
or
P2
, on the EZ-KIT board.
2. Attach the provided cord and appropriate plug to the 5V power adapter:
a. Plug the jack-end of the power adapter into the power connector
P19
on the EZ-KIT board.
b. Plug the other side of the power adapter into a power outlet. The power LED (
LED1
) is lit green when
power is applied to the board.
It is assumed that the IAR Embedded WorkBench software is installed and running on your PC.
1. Navigate to the
IAR Embedded WorkBench
environment via the
Start
menu.
2. Choose
File > Open > Workspace
to open a workspace for the project to download and debug.
3. Choose
Project > Options
.
The
General Options
,
Target
page appears.
4. In
Processor variant
, ensure
Device
is
Analog Devices CM41x
5. Choose
Debugger
in the
Category
pane.
The
Debugger
,
Setup
options page appears.
a. In
Driver
, choose
J-Link/J-Trace
as the emulator to be used to debug the target board.
b. Click the
Download
tab. The
Debugger
,
Download
options page appears.
c. Ensure
Use flash loader(s)
is enabled. Note that other download settings are optional.
6. Choose
Debugger > J-Link/J-Trace
in the
Category
pane.
The emulator
Setup
options page appears.
a. On the
Setup
page,
•
In
Reset
, select
Connect during reset
from the drop-down list.
•
In
JTAG/SWD speed
, select
Auto
.
•
(Optional) In
Clock setup
, change the default values.
b. On the
Connection
page,
•
In
Communication
, select
USB
and
Device 0
.
•
In
Interface
, select
SWD
.
7. Click
OK
to save the emulator settings.
IAR Embedded WorkBench Setup
ADSP-CM419F EZ-KIT
®
Manual
2–5
