ADSP-CM403F EZ-KIT Lite Evaluation System Manual
1-3
Using ADSP-CM403F EZ-KIT Lite
ADSP-CM403F EZ-Board
The ADSP-CM403F EZ-KIT Lite is shipped with the J-Link Lite ARM
debugger. When the product is not shipped with the debugger, it is
referred to as the ADSP-CM403F EZ-Board.
The EZ-Board requires a third party emulator.
Default Configuration
The ADSP-CM403F EZ-KIT Lite board is designed to run outside your
personal computer as a standalone unit.
When removing the EZ-KIT Lite board from the package, handle the
board carefully to avoid the discharge of static electricity, which can dam-
age some components.
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human body
and equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high-energy discharges. Proper ESD precau-
tions are recommended to avoid performance degradation or loss of function-
ality. Store unused EZ-KIT Lite boards in the protective shipping package.
