ADSP-BF706 EZ-KIT Mini Evaluation System Manual
1-9
Using ADSP-BF706 EZ-KIT Mini
ADSP-BF706 EZ-KIT Mini for Arduino Uno
R3 Connectivity
The ADSP-BF706 EZ-KIT Mini supports shield use through connectors
P2
,
P3
,
P5
, and
P6
, allowing compatibility with the Arduino Uno R3
boards. The connectors are not provided, but can be purchased online.
The connectors are standard 0.1" stackable headers that allow for more
than one shield to be attached. Signal output from the Arduino Uno R3
board is buffered on the ADSP-BF706 EZ-KIT Mini to ensure that the
voltage level is tolerant with the ADSP-BF706 processor. Output signals
from the ADSP-BF706 processor drive at 3.3V to connectors
P2
,
P3
, and
P5
ADSP-BF706 EZ-KIT Mini Schematic
for more details.
External Connection Points
Connectors
P1
,
P4
, and
P9
allow a user to attach wires to processor signals
for interfaces such as EPPI, SPORT, TWI, TMR and GPIO of the
ADSP-BF706 processor.
Debug Interface
The EZ-KIT Mini has an on-board debug agent which provides software
development with one piece of hardware.
