ADSP-BF706 EZ-KIT Mini Evaluation System Manual
2-5
ADSP-BF706 EZ-KIT Mini Hardware Reference
Debug Agent Jumper (ZJP1)
Debug agent jumper (
ZJP1
) needs jumpers across pins
1
,
3
as well as
2
,
4
for proper operation. The jumpers should run parallel to the silkscreen for
ZJP1
.
Power Selection Jumper (JP2)
Positions
1
,
2
select the debug agent as the entire board power source. 5V
is supplied from
ZP1
. Setting
JP2
to positions
2
,
3
selects 5V power from
the USB connector (
P8
). The debug agent can still be powered through
ZP1
. See
for more details.
Bulk Decoupling for USB Host Mode (P13)
When powering through
ZP1
, a device connected to
P8
can be powered by
the 5V sourced via USB connector
ZP1
. When using this feature, install a
jumper on
P13
prior to any USB cable insertion.
P13
insertion adds a bulk
cap to the 5V supply connected to
P8
.
