Analog Devices ADSP-2189M EZ-KIT Lite, Manual

Page: 54 / 81

Connectors
3-12 ADSP-2189M EZ-KIT Lite Evaluation System Manual
European Power Supply Connections
Table 3-4 summarizes the European power supply specifications.
AD73322 Codec Connectors
When the AD73322 codec is enabled on the EZ-KIT Lite board, you can
access the audio input and output jacks on the board. Each of the audio
connectors are stereo mini jacks and accept standard commercially avail-
able stereo mini plugs.
The
Microphone
/
Line_in Input
jack connects to the
LINE_IN_L
(left) and
LINE_IN_R
(right) pins or the
MIC1
and
MIC2
of the AD73322 SoundPort
Stereo codec, depending on the setting of jumpers
JP3
.
The
LINE Output
jack connects to the left (
L
)
LINE_OUT
and right (
R
)
LINE_OUT
pins of the codec.
EZ-ICE Connector
The ADSP-218x EZ-ICE Emulator aids the hardware debugging of an
ADSP-2189M system. The emulator consists of hardware, host computer
resident software, and the target board connector. The ADSP-2189M
integrates on-chip emulation support with a 14-pin ICE-Port interface
Table 3-4. European Power Supply Connections
DC Voltage 8 to 10V DC
CURRENT 4 amps maximum rating
RIPPLE 500 mV rms (Max @ full load
DC Connector
Type Switchcraft 760 style FEMALE
Plug Size 5.5 (OD) X 2.5 (ID) X 9.5 (length) millimeters
Polarity Center is positive (inside terminal)