Analog Devices ADSP-2181, Manual

Page: 38 / 70

Using EZ-KIT Lite Vi+ Interface
2-14 ADSP-2181 EZ-KIT Lite Evaluation System Manual
Registers and Memory
To see current values in registers and memory, use the F12 key or the
Window , Refresh command.
#
Register and memory contents may not be changed while the user
program is running.
Setting Breakpoints and Stepping
The debugger automatically inserts breakpoints at the function
main()
,
when the Settings , Run To Main command is checked, and at the
_exit
instruction.
#
Breakpoints set in the last three instructions of a do-loop are
allowed, but this causes improper debugger operation.
Resetting EZ-KIT Lite Board
The EZ-KIT Lite board can be reset with the push button switch on the
board or with the
Debug , Reset command in the debugger. After per-
forming a reset, reload any programs you were running. The Debug ,
Restart command also resets the processor. The processor, however,
retains all debug information and memory contents.
The following sequence must be used when starting the debugger:
1. Start Vi+ from the Windows Start menu.
The debugger starts and the Target message Hit Reset Button
appears.
2. Press the reset button.
3. Click OK .
#
Do not use the reset button while the debugger is open unless the
debugger requested to do so.