ADSP-21160 EZ-KIT Lite Evaluation System Manual
2-1
2 ADSP-21160 EZ-KIT LITE
HARDWARE
This chapter describes the hardware design of the ADSP-21160 EZ-KIT
Lite board. The following topics are covered.
•
“System Architecture” on page 2-2
Describes the configuration of the ADSP-21160 EZ-KIT Lite
board and explains how the board components interface with the
processor.
•
“Jumper and Switches” on page 2-6
Shows the location and describes the function of the on-board
jumper and DIP switch.
•
“LEDs and Push Buttons” on page 2-8
Shows the location and describes the function of the LEDs and
push buttons.
•
Shows the location and gives the part number for the on-board
connectors. Also, the manufacturer and part number information is
given for the mating parts.
•
Provides the board’s measurements and power supply
specifications.
www.BDTIC.com/ADI
