ADP5350CP-EVALZ User Guide
UG-1104
One
Technology Way
t
P.O. Box 9106
t
Norwood, MA 02062-9106, U.S.A.
t
Tel: 781.329.4700
t
Fax: 781.461.3113
t
www.analog.com
Evaluating the
ADP5350
Battery Management PMIC with Inductive Boost LED and
Three LDO Regulators
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 15
FEATURES
Input voltage: 4.0 V to 5.38 V
Full featured evaluation board for the
ADP5350
Evaluation software and installation CD included
Simple device measurements and demonstrable with
A voltage supply
A battery or battery simulator
Load resistors or an electrical load
EQUIPMENT NEEDED
USB to I
2
C dongle
USB-SDP-CABLEZ
(not included in the
evaluation kit and must be ordered separately)
SOFTWARE NEEDED
ADP5350CP-EVALZ
graphic user interface (GUI) software
GENERAL DESCRIPTION
This user guide describes the hardware and software for the
evaluation of the
ADP5350CP-EVALZ
evaluation board, and
includes detailed schematics and printed circuit board (PCB)
layouts.
The
ADP5350
combines one high performance buck regulator
for single Li-ion/Li-ion polymer battery charging, a fuel gauge,
a highly programmable boost regulator for LED backlight
illumination, one ultralow quiescent current low dropout
(LDO) regulator, and two general-purpose LDO regulators.
The
ADP5350CP-EVALZ
evaluation board supports an
external USB dongle connection and the GUI software allows
the user to evaluate the comprehensive functionalities provided
by the I
2
C interface.
The
ADP5350
operates over the −40°C to +125°C junction
temperature range and is available in a 32-lead, 5 mm × 5 mm
LFCSP package.
Full details on the device are provided in the
ADP5350
data
sheet, available from Analog Devices, Inc., which must be
consulted in conjunction with this evaluation board user guide.
ADP5350CP-EVALZ
EVALUATION BOARD
Figure 1.
15553-
001
