EVAL-ADP8860
Rev. 0 | Page 7 of 24
To run the ADP8860 GUI, click
Start
>
All Program
s >
Analog
Devices
>
ADP8860 Evaluation Software 0_x
>
ADP8860
Evaluation SW
. If the program starts correctly and the board is
detected, the ADP8860 GUI appears as shown in Figure 14. The
program default settings are as follows:
•
All registers are initialized to zero.
•
Comparators unit is in lux.
•
Enable History Log
is unchecked (data exchanged with
the ADP8860 is not logged).
•
Read Refresh
option is unchecked (status registers are not
read periodically).
•
Refresh delay is 1000 ms.
•
Smart Update
option is checked (any change to the
registers control triggers a write operation to the device).
•
Verify after Write
option is unchecked (a write operation
is not verified).
READ/WRITER
REGISTERS
(GUIDED VIEW)
READ/WRITE
REGISTERS
CLOSE
APPLICATION
STOP
APPLICATION
WRITE DEVICE
REGISTERS
READ DEVICE
REGISTERS
LOAD/SAVE
REGISTER
CONFIGURATION
07
98
8-
01
4
Figure 14. ADP8860 GUI
