background image

 

EV-ADF4355-2SD1Z User Guide

UG-804

One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com 

 

Evaluating the 

ADF4355-2

 Fractional-N/Integer-N PLL Frequency Synthesizer 

 

Rev. 0 | Page 1 of 18 

FEATURES 

Self contained board, including 

ADF4355-2

 frequency 

synthesizer with integrated VCO, differential 122.88 MHz 
temperature controlled crystal oscillator (TCXO), loop 
filter (20 kHz), USB interface, and voltage regulators 

Windows®-based software allows control of synthesizer 

functions from a PC 

Externally powered by 6 V 

EVALUATION KIT CONTENTS 

EV-ADF4355-2SD1Z

 

USB cable 

EQUIPMENT NEEDED 

Windows-based PC with USB port for evaluation software 
System demonstration platform, serial only (

SDP-S

EVAL-SDP-CS1Z

 controller board 

Power supply (6 V) 
Spectrum analyzer 
50 Ω terminators 

ONLINE RESOURCES 

Documents Needed

 

ADF4355-2

 data sheet 

EV-ADF4355-2SD1Z

 user guide 

PLL Software Installation Guide

 

Required Software 

Analog Devices, Inc., 

ADF4355-2

 software, Version 0.46.1 

or higher (available for download at 

www.analog.com/ADF4355-2

GENERAL DESCRIPTION 

The 

EV-ADF4355-2SD1Z

 evaluates the performance of the 

ADF4355-2

 frequency synthesizer with integrated VCO for 

phase-locked loops (PLLs). A photograph of the evaluation 
board is shown in Figure 1. The evaluation board contains the 

ADF4355-2

 frequency synthesizer with integrated VCO, a 

differential 122.88 MHz reference (TCXO), a loop filter, a USB 
interface, power supply connectors, and subminiature Version 
A (SMA) connectors. A USB cable is included to connect the 
board to a PC USB port.  

For easy programming of the synthesizer, download the 
Windows-based software from 

www.analog.com/ADF4355-2

This board requires an 

SDP-S

 (shown in Figure 1, but not 

supplied with the kit). The 

SDP-S

 allows software programming 

of the 

EV-ADF4355-2SD1Z 

device. 

EVALUATION BOARD PHOTOGRAPH 

 

Figure 1. 

EV-ADF4355-2SD1Z

 

 

12941

-0

01

Summary of Contents for ADF4355-2SD1Z



















Reviews: