12
Treatment Instructions
Before beginning treatment, be sure to test the FOLIGAIN
®
Laser Comb for sensitivity (Page 5).
After you have turned on the Laser
Comb, place it flat on your scalp so
that both rows of teeth are touching
your scalp (Figure E).
Start at your hairline. Move the Laser
Comb from front to back of scalp in
a slow combing motion, stopping
every 1⁄2 inch (1cm) and pausing
for 4 seconds (Figure F). Do not lift
the Laser Comb off your scalp while
combing from front to back. Next,
lift the Laser Comb off your scalp and start at a new position at the
hairline. Continue in this manner from front to back, then side to
side, until you cover your entire scalp with multiple passes.
IMPORTANT
: Do not lift the Laser Comb off your scalp while
combing from front to back or side to side unless you are starting
at a new position at the hairline. The Laser Comb features a pair
of comb teeth that part the hair so the light can more effectively
penetrate to the scalp. You will make a few complete passes over
your scalp within recommended treatment time.
Repeat these passes within the
required treatment of 15 minutes. If
you have long hair, use your fingers to
lift your hair out of the way allowing
the Laser Comb to deliver the laser
light to the scalp (Figure G).
Turn off the Laser Comb by sliding
the power/laser button to the lowest
position (Figure H). Store the device
in the cradle/stand for future use.
TREATMENT INSTRUCTIONS – FOLIGAIN.L7x
®
ADVANCED LASER COMB
E
F
G
H
