background image

Chapter 1: Safety precautions in use

1. The input voltage of the appliance is AC220-240V

50/60Hz. Please confirm it before using the

appliance.

2. Do disconnect the power supply before dismantling, assembling or adjusting any part of the appliance.
3. The appliance has Y connection. If its power cord is damaged, please contact our customer service

department or have it directly replaced at a service center designated by us to avoid dangers. Do not
dismantle and repair it by yourself.

4. Before use, please check if the power cord, the plug, the juice strainer, the spiral pusher and any other part

is damaged. If any of the said part is damaged, stop using the appliance and contact our customer service
department promptly. Do not dismantle and repair it by yourself, otherwise dangers may happen.

5. If it is necessary to repair the appliance during use, please contact our customer service department or

have it directly repaired by a service center designated by us. Do not dismantle it by yourself, otherwise
dangers may happen.

6. It is necessary before connecting the power supply to ensure that the juicing body, the spiral pusher, the

juicing body cap and all other dismountable parts are properly installed.

7. Never put hands or sharp objects into the feed port or contact the spiral pusher when the appliance is

running, otherwise injuries may be caused or the appliance may be damaged; never replace the spiral
pusher with any other objects or have eyes get close to the feed port, otherwise accidents may happen.

8. Cut food ingredients into small blocks with sizes fitting the feed port of the juicing body. Do not begin to

process any vegetables or fruits with cores, hard seeds or thick skin or shells until the cores, hard seeds or
thick skin or shells are removed.

9. When feeding a food ingredient, do not make the pushing force too large but have it just enough to cut the

food ingredient.

10. Dyeing of the juice strainer, the juicing body cap, the spiral pusher and other accessories after juicing of

some vegetables or fruits is normal and will neither affect food easting nor do harm to health.

11. Equipped with an intelligent protective chip, the appliance will stop automatically after 20 minutes of

continuous running. In this case, wait for 20 to 30 minutes before continuous use until the motor has
cooled down to prolong the service life of the appliance.

12. The appliance has a current limiting design, so its motor will get locked and its current will increase when

hard food ingredients are processed. When the current is larger than 1.3A, the appliance will tick and the
motor will pause for 2 seconds, then reverse automatically for 5 seconds and finally stop running (the
food in the appliance can be discharged when the motor reverses). In this case, the appliance can begin to

1

Summary of Contents for ZM1501












Reviews: