Amytel AW 630, User Manual, Page: 6 / 9

Scan
By scanning, you can monitor channels and codes for transmissions
and lock in on the one that interests you. More importantly, you can
find someone in your group who has accidentally changed channels
and is talking during your scan.
To start scanning, briefly press and release the “MON”
button.
If you activate scan while your code is set to 0, then the radio
will check for any activity on each channel, regardless of the
code in use on that channel.
If you activate scan while the code is set on 1 to 38, the radio
will check for any activity on each channel, except code 0 in
use on that channel.
While the radio is scanning, Scan Icon will display and the
radio will scroll through the channels.
When activity is detected on a channel, the radio will stop
scanning and you will hear whatever transmissions are
detected. The radio’s display will show the channel and code
on which activity was detected.
If you want to respond to the transmission, press “PTT”
button within 5 seconds and you can respond.
The radio will resume scanning after 5 seconds of inactivity
on the channel.
To stop scanning, briefly press and release “MON” button.
Scan Advance
If the radio stops scanning on a channel you do not want to listen
to, briefly press and release “+” or “-” to resume scanning for the
next active channel.
Removing Channels from the Scan List (Nuisance Delete
Feature)
If scan continuously stops on an undesired channel, press and
hold ”+” or “- ” button for least 3 seconds, then release. This will
temporarily remove the undesired channel from the scan list.
To restore the channel in the scan list, turn the radio off and then
on. You cannot remove your home channel from the scan list
(your home channel is the channel your radio was set to when you
activated scan).
Special Features
Interference Eliminator Code
Interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
Press “MENU: button until the code number begins to flash.
Use “+” or “-” button to change the code.
Press “PTT” to set new code.
You can specify a different code for each channel.
To set a channel and code combination, press “MENU”
Channel Frequency (MHz) Channel Frequency (MHz) Power -
Watts
1
409.7500
11
409.8750
0.5
2
409.7625
12
409.8875
0.5
3
409.7750
13
409.9000
0.5
4
409.7875
14 409.9125 0.5
5
409.8000
15 409.9250 0.5
6
409.8125
16 409.9375 0.5
7
409.8250
17 409.9500 0.5
8
409.8375
18 409.9625 0.5
9
409.8500
19 409.9750 0.5
10
409.8625
20 409.9875 0.5
8 7