ACCESSORY INSTALLATION - STELLA (
Cont’d
)
5
IG
–
PD-A20608
–
Rev01
5.
Armrests
Tools: 4 mm Allen key and long-nose pliers.
5.1 Install armrest bracket onto the frame underneath the handle
’s
height adjustment mechanism.
5.2 Tighten both screws with a 4 mm Allen key. Make sure that both screws are tight. There should
not be any movement in the armrest bracket.
5.3 The armrest activation tension can be adjusted by tightening or loosening the screw,
using a 4 mm Allen key and a pair of pliers on the release tab side.
