- 10 -
1) Check to see if there is a task error in the Foil printer printer. Resend the task after clearing all the
tasks.
2) Check if the data line is validly connected.
3) The printer used is not right, choose Foil printer printer.
3. When there are errors between the printed position and the software design position:
1) Measure whether the print material is proportional to the size of the computer design.
2) Turn off the saving ribbon function; add 0.1mm line to the edge of the page to print.
3) Paper specifications selected in printer settings are no t consistent with paper length.
4) Whether the actual meter value printed by the measuring equipment is accurate or not; upgrade
the control system if there are errors.
4. When the errors between the printed position and the software design position are left and right:
1) Content Location in Mobile Computer Layout.
2) Position of Paper in Moving Cardboard.
3) Paper specification width selected in printer settings is not 252mm.
5. Ineffective printing:
1) Please use original genuine gilding paper.
2) Adjusting Printing Concentration and Printing Speed in Printer Settings.
3) Clean printing head with cotton swab and alcohol.
4) Gold-stamped paper with matching materials.
6. When there is paper on the cardboard but not on it:
1) Check whether the paper feeding sensor and the in-place sensor are damaged or not.
2) If the sensor in place is not reset after triggering, the sensor can be reset.
7. When the printed content is presented as a whole:
1) The layout of the print head is not inserted in place; just re-install the layout.
2) Damage to the layout of the print head, replace the new layout of the print head.
8. Sometimes the printed content is normal and sometimes the front edge is missing:
1) Damper resistance is too large; adjusting damper resistance is enough.
2) The strength of the ribbon is too small; check if the belt needs to be replaced and replace the belt.
9. When the printing effect is grid-shaped:
1) Change the color of the printed file to black.
2) Print the content in color or picture, adjust it to black.
V. Matters Need Attention
1. The machine is placed in a dry and ventilated place. To ensure the clean working environment of
the machine, the indoor humidity should be about 55%, and the temperature should be between 5
and 25 degrees Celsius. If necessary, please use humidifier and install air conditioning. The indoor
temperature will seriously affect the printing effect.
2. The internal circuit of the equipment is controlled by high voltage lines. Non-professional and
unauthorized personnel of the company should not dismantle and repair the equipment without
permission.
3. Pressure under the print head is enough to hurt your body. It is strictly forbidden to put your hand
under the print head when the device is powered on.
4. The printer head should be cleaned regularly with alcohol and medical cotton. It is strictly
