Master Service
63
Vision
2
Operation/Reference Guide
Configuring Vision
2
for use with LDAP
If you intend to use Lightweight Directory Access Protocol (LDAP), then before you begin there is an XML
file on the Vision
2
server which must be edited manually. You must edit the
ldsl.xml
file located in the
C:\Inetpub\wwwroot\v2Services\App_Code
directory. The contents of this file are used to impersonate the
specified user when communicating with the LDAP server. For this reason, the user defined by these settings
must have read rights on the LDAP server. The file contains the following entries:
username - This is the user to impersonate
domain - The domain in which the LDAP server resides
password - The password of the user to impersonate
It also contains and entry for
userattributecontainingloginname
. This entry, as the name suggests, contains the
name of the attribute within the user Distinguished Name (DN) which holds the value that the user supplies
when they log in. For a normal Active Directory implementation, this value is
sAMAccountName
and for
ADAM it is usually
name
.
User Access Control
This section of the v2ServicesManager controls whether the system supports User Access Control (UAC), and
if so, the type of UAC employed. (Where possible, example values are provided for both Active Directory and
ADAM).
FIG. 62
User Access Control screen
Summary of Contents for Vision 2
