![background image](http://html.mh-extra.com/html/amx/vision-2/vision-2_operation-reference-manual_2938882119.webp)
Producer Service
109
Vision
2
Operation/Reference Guide
Producer Service
Overview
The Vision
2
Producer Services provides a single scheduled TV channel to the system. Producer schedules a
unicast of WMV files or a multicast of MPEG-2, MP4 H.264, or WMV files or a live channel from a Vision
2
archive. Schedules run on a four week loop, then begin again after the four weeks have expired. In the event
there is no content scheduled for a certain period of time, Producer enables you to set an intermission source
which automatically plays an MPEG-2, MP4 H.264, or WMV file from a Vision
2
archive, a multicast
MPEG-2 or MP4 H.264 source such as a DVB or Live MPEG channel, or a unicast WMV source such as a
live WMV channel. Please note that both the MPEG, MP4 H.264, and WMV (Windows Media Video) variants
are managed in exactly the same manner, and that this section is applicable to both services.
Configuration
When you select
Configure Service
from the Producer menu, the following page appears (FIG. 106).
FIG. 106
Configure Producer Service
Summary of Contents for Vision 2
