Quick Reference Guide
OVERVIEW
The VPT-CP ViewPoint Color Wireless Touch Panel
and VPT-GS ViewPoint Grayscale Wireless Touch
Panel are hand-held, liquid crystal display (LCD),
touch panels that allow you to control devices
remotely.
FEATURES
The features of the ViewPoint Touch Panels are:
•
VPT-CP 6-inch (diagonal), 320 x 240
pixel, 256 color LCD screen
VPT-GS 6-inch (diagonal), 320 x 240
pixel, 16-shade grayscale LCD screen
•
Four external programmable buttons
•
Programmable firmware via on-board serial
port
•
One-way radio frequency (RF) or infrared
(IR) transmission
•
On-board battery-charging circuitry
•
Hand-held or desktop usage
•
Battery life exceeding 6 continuous hours of
operation, or up to 2 weeks typical operation
CONNECTIONS
The ViewPoint uses two connectors. The power jack
is for connecting an external power supply (furnished)
for ViewPoint operation/charging. The programming
jack is a 3-wire, 2.5 mm stereo jack. The ViewPoint
comes with the required cable and power supply.
Power jack
Programming jack
Cable FG-10-817 to cable FG10-727
to your PC’s RS-232 port
ViewPoint to PC
programming cable
Stereo plug, male
CLEANING THE TOUCH
OVERLAY
You should clean the touch screen overlay after each
day’s use.
1.
Obtain two clean cotton cloths and a spray bottle
of cleaning solution consisting of 50% isopropyl
alcohol and 50% water.
2.
Spray a small amount of the cleaning solution
onto one of the cloths.
3.
Clean the touch panel overlay with the damp
cloth.
4.
Wipe the touch panel overlay with the dry cloth.
RECHARGEABLE BATTERY
The ViewPoint uses a VPA-BP ViewPoint
Rechargeable Battery. The illustration shows the
VPA-BP and placement in the ViewPoint.
VPA-BP Battery
Battery sash
