AMX UDM-RX02N Operation/Reference Manual Download Page 13 | Manualshive

Page: 13 / 96

background image

UDM-0808-SIG 8x8 Signature Series Multi-Format Distribution Hub

3

UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide

Configuration Options



Use NetLinx SEND_COMMANDs to configure and control the UDM-0808-SIG. Refer to the
UDM-0808-SIG NetLinx Programming section on page 13 for programming details.



The UDM-0808-SIG WebConsole can be used to configure master connection, networking, and
time settings. Refer to the UDM-0808-SIG WebConsole section on page 23 for details.

Rack-Mounting the UDM-0808-SIG

The UDM-0808-SIG occupies two rack spaces in a standard 19" equipment rack. Rack mounting brackets and
screws are located in the accessories box supplied with the UDM-0808-SIG.

1.

Remove the aluminum feet from the bottom of the Hub.

2.

Attach one rack mounting bracket to each side of the UDM-0808-SIG using two M4 screws for each
bracket (FIG. 2).

3.

Place the UDM-0808-SIG in the equipment rack and hold steady.

UDM-0808-SIG Specifications (Cont.)

Dimensions:

• 3.5" x 19" x 12 1/2" (889 mm x 440 mm x 320 mm)

• 2 RU

Weight:

13.6 lbs. (6.16 kg)

Certifications:

• CE

• FCC part 15 Class A

Included Accessories:

• IEC power cord

• 19" mounting brackets

• UDM-RC05 Multi-Format IR Remote Control (FG1402-70)

• IR03 External Infrared Receiver Module (FG-IR03)

Note

: No A/V interface cables supplied.

Other AMX Equipment:

• HD15 to S-Video Cable (FG-UDM-SVID01)

• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3)

• UDM-RX02N Multi-Format Receiver (FG-1402-20)

• UDM-ABB-8-SIG Audio Breakout Box (FG1402-60)

• IR01 IR Emitter Module (FG-IR01)

• UDM-EXP-02 Cascade Cable (FG1402-71)

• RS-232 DB-9/RJ-12 connection cable (FG-RS01)

• 6' Ethernet Crossover Cable

Exercise extreme care when lifting or moving the Hub within the rack to avoid injury. It
is recommended that you seek the assistance of another person when rack mounting
the UDM-0808-SIG.

FIG. 2

Attach the mounting brackets to each side of the Hub (2 brackets per side)

Rack-Mounting Brackets

To prevent injury the Hub must be securely attached to the rack in accordance with
the installation instructions.
Always use the special rack mount brackets supplied and high quality fixing screws to
ensure the Hub is installed in the rack correctly.

«
...
11
12
13
14
15
...
»

Summary of Contents for UDM-RX02N

































































































Reviews:

No comments

Related manuals for UDM-RX02N

Brand: Denon Pages: 142

Brand: R&S Pages: 183

Brand: Panasonic Pages: 118

CQRX400U - AUTO RADIO/CD/MP3 DECK

Brand: Panasonic Pages: 18

CQRX400U - AUTO RADIO/CD/MP3 DECK

Brand: Panasonic Pages: 24

CQVW100U - Car Audio - In-Dash DVD Receiver

Brand: Panasonic Pages: 47

Brand: Yaesu Pages: 34

Brand: Yaesu Pages: 26

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 22

Brand: Yaesu Pages: 68

Brand: Pansat Pages: 32

Brand: FAAC Pages: 2

Brand: Garmin Pages: 14

Brand: u-blox Pages: 2

SCD 3390 RDS Challenge 600 CD

Brand: Grundig Pages: 28

Brand: Stabila Pages: 10

Brand: VDO Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands