Installation Guide
Solecis
AVS-SL-0401-838
Overview
The Solecis AVS-SL-0401-838 (
FG1330-1600-04
) is a wideband high resolution
4x1 HD-15 and Audio switcher for all computer presentation applications up to
UXGA. The AVS-SL-0401-838 incorporates a driven output for connection to
long cable runs. Control of the AVS-SL-0401-838 is from the front panel or via
RS232.
The audio switcher follows the selected video input, and is stereo balanced or
unbalanced.
The AVS-SL-0401-838 is powered by an external power supply (supplied) and is
housed in a metal enclosure.
Product Specifications
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
•
Do not place the unit on an unstable surface.
•
Do not use near water or sources of heat.
•
Use only recommended attachments.
•
Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
•
If liquid has been spilled or the unit has been exposed to rain or water.
•
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
•
If the unit has been dropped or the cabinet damaged.
Connections
1.
Connect the PC sources to the Input sockets on the rear panel of the unit.
• The RGB inputs are 75 ohm terminated while the Syncs are high
impedance.
• The RGBHV output is fully 75 ohm driven for connection to long cable runs.
Note
: It is imperative that the input sources are fully compatible with the
display device.
2.
The unit may now be powered.
Power Up
1.
Connect the supplied power supply to the Power Socket on the rear of the
unit.
2.
Connect the power supply to the Mains supply.
Operation (Front Panel)
Source Selection
1.
To select a Source, press the Button corresponding to the numbered Input.
2.
The button will illuminate and the selected PC source will be routed to the
output socket.
FIG. 1
Solecis AVS-SL-0401-838
Solecis AVS-SL-0401-838 Specifications
RGB Input
Number:
4
Connectors:
HD-15
Level:
Analog
Max Level:
1V p-p
Termination:
75 ohm
RGB Video Bandwidth:
350MHz -3dB
RGB Return Loss:
-45dB@10MHz, -32dB@100MHz
Sync Input
Level:
Analog/TTL
Max Level:
5V p-p
Impedance:
470 ohm
Audio Input
Number:
4
Connectors:
3.5mm stereo
Type:
Unbalanced analog
RGB Output
Number:
1
Connector:
HD-15
Level:
Analog
Gain:
Unity
Sync Output
Level:
TTL
Impedance:
75 ohm
Solecis AVS-SL-0401-838 Specifications (Cont.)
Audio Output
Number:
1
Connector:
captive-wire
Type:
balanced/unbalanced
Control
Front Panel:
4 Source selection pushbuttons - see
Operation (Front
Panel)
.
RS232:
May be controlled using AMX or any other RS232
outputting system - see
RS232 Control
.
Power
Input Voltage:
9-12VDC
Power Consumption:
5W
Dimensions (HWD):
1.86” x 9.10” x 4.35” (47.2 mm x 231.1 mm x 110.6 mm)
• Height includes feet
• Depth includes connectors
Weight:
3.30 lbs (1.5kg)
Included Accessories:
• PS2.8 power supply (FG423-11)
• Three 3-pin phoenix connectors (41-0159)
Certifications:
• CE
• FCC class B, part 15
• RoHS/WEEE compliant
