background image

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

4/11

©2011 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.

AMX reserves the right to alter specifications without notice at any time. 

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

  93-032-10

 

REV: B 

FIG. 2  

Screw locations for Rough-In Box attachment in a pre-wall installation

FIG. 3  

Wall Mount panel installation configuration for pre-existing Rough-In Box in a pre-wall construction

Drywall/

Stud

Knockouts should be located on the left-side of the

CB-TP15 Rough-In Box

Rough-In Box, alongside the connectors

Stud fastening holes

Use the four #4-40
Mounting Screws to 
secure the NXD to the 
Rough-In Box at these

sheetrock

Mounting tabs
for NXD panel should
be flush with the outside of the sheetrock

locations

B

 - Main NXD unit consists of 

C

 - Optional CB-TP

Install the four #4-40

screws into the places

indicated

Stud

the touch panel and backbox housing

Rough-In Box

Cable

knockouts

Installed flush
against the
finished wall

Do not

 use these

tabs to mount

the rough-in /wallbox

These are ONLY used to

secure the main unit to the box

SURFACE

surface

A - 

Faceplate

(bezel)

Mounting Tab

Reviews: