For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
5/08
©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-0423-41
REV: G
PSN2.8 and PS2.8 Specifications
FIG. 3 shows the PSN2.8. The PS2.8 power supply is identical to the PSN2.8,
except that the PSN2.8 comes with a 3.5 mm NetLinx compatible 2-pin mini
connector whereas the PS2.8 comes with a 5mm standard Axcess compatible
connector.
The PS2.8 also includes a spare 3.5 mm captive wire connector.
Note:
The PS2.8 is also available with a barrel-plug (FG423-11) instead of the
2-pin captive wire connector.
The PSN2.8 and PS2.8 power supplies are Class 1 power supplies; both are
CSA and CE approved and UL listed.
• The PSN2.8 has an attached mini 2-pin captive wire connector
(3.5 mm).
• The PS2.8 comes with both an attached 2-pin captive wire connector
(5 mm) and a spare 3.5 mm captive wire connector.
Barrel Plug Dimensions
The dimensions of the Barrel Plug used by both the PS2.8 and PS4.4 power
supplies are:
• 2.1mm ID
• 5.5mm OD
• 9.5mm length
PS3.0 Specifications
FIG. 4 shows the PS3.0. The PS3.0 is a Class 1 power supply which is CE
approved and UL listed. The PS3.0 uses a barrel-plug connector.
PSN4.4 and PS4.4 Specifications (Cont.)
Temperature
Range:
• 32°F - 104°F (0°C - 40°C)
Certification:
• UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
Included
Accessories:
• Single Universal input power cord (64-0009)
FIG. 3
PSN2.8 Power Supply
PSN2.8 and PS2.8 Specifications
Dimensions (HWD):
• 4.6" x 2.5" x 1.5" (11.7 cm x 6.4 cm x 3.8 cm)
Weight:
• 1 lb. (450 g)
Input Voltage:
• 100-240 +10% VAC
Input Frequency:
• 47-63 Hz
Input Current:
• 0.9A MAX at 115 VAC + full load
• 0.6A MAX at 230 VAC + full load
Output Voltage:
• 13.5 VDC
Output Current:
• 2.8A (continuous power output is 35 W max).
Ripple and Noise:
• 135 mV peak-to-peak @ full load
Protection:
• Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
Power Indicator:
• Green LED indicates the presence of DC on the
output.
Connectors:
PSN2.8
• Mini 2-pin captive wire connector (3.5 mm).
PS2.8
• 2-pin captive wire connector (5.0 mm),
• also available with barrel plug (see
Barrel Plug
Dimensions
)
Input Power Cord:
• 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input.
Enclosure:
• Molded black matte plastic, with captive 6-foot (1.83
m) output cord and IEC male input power jack.
Temperature Range:
• 32°F - 122°F (0°C - 50°C)
PSN2.8 and PS2.8 Specifications (Cont.)
Certification:
• UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
Included Accessories:
• Single Universal input power cord (64-0009)
FIG. 4
PS3.0 Power Supply
PS 3.0 Specifications
Dimensions (HWD):
• 3.85’ x 1.77" x 1.22" (9.80 cm x 4.50 cm x 3.10 cm)
Weight:
• 0.33 lbs. (150 g) (without power cord).
Input Voltage:
• 100-240 VAC, 3.0 A, 47~63 Hz
Output Voltage:
• 12 VDC
Output Current:
• 3.0 A.
Ripple and Noise:
• 200 mV (60Hz Switching ripple and noise).
Protection:
• Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
PWR Indicator:
• Green LED indicates presence of DC on the output.
Connectors:
• 1.3mm barrel plug, 11mm long.
Input Power Cord:
• 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input (U.S. only).
Enclosure:
• Metal with black matte finish.
Temperature Range:
• Operating temperature: 32°F - 122°F (0°C - 50°C)
• Storage temperature: -4°F - 185°F (-20°C - 85°C)
Certification:
• UL: US listed - Class 1 Power Supply
• CUL approved
• TUV approved
• FCC approved
• CE approved
• PSE approved
Included
Accessories:
• Single Universal input power cord (64-0009)