Address Table Settings
99
Instruction Manual - NXA-ENET8-POE+
Perform these steps to show the dynamic address table:
1.
Click
MAC Address
>
Dynamic
.
2.
Select
Show Dynamic MAC
from the Action list.
3.
Select the Sort Key (MAC Address, VLAN, or Interface).
4.
Enter the search parameters (MAC Address, VLAN, or Interface).
5.
Click
Query
.
Clearing the Dynamic Address Table
Use the MAC Address > Dynamic (Clear Dynamic MAC) page to remove any learned entries from the forwarding database.
The following table lists the options on this page:
Perform these steps to clear the entries in the dynamic address table:
1.
Click
MAC Address
>
Dynamic
.
2.
Select
Clear Dynamic MAC
from the Action list.
3.
Select the method by which to clear the entries (i.e., All, MAC Address, VLAN, or Interface).
4.
Enter information in the additional fields required for clearing entries by MAC Address, VLAN, or Interface.
5.
Click
Clear
.
FIG. 105
Displaying the Dynamic MAC Address Table
MAC Address - Dynamic Options
Clear by
All entries can be cleared; or you can clear the entries for a specific MAC address, all the entries in
a VLAN, or all the entries associated with a port or trunk.
FIG. 106
Clearing Entries in the Dynamic MAC Address Table