Installation
23
Instruction Manual - NXA-ENET8-POE+
Installation
This chapter features the following sections:
Package Contents
Switch Installation Tasks
Package Contents
After unpacking the switch, check the contents to be sure you have received all the components.
NXA-ENET8-POE+ Gigabit PoE Ethernet Switch
AC Power Cord
Rack Mounting Kit containing two standard brackets and eight screws for attaching the brackets to the switch.
4 adhesive foot pads for surface mounting
Quick Start Guide
Safety Instructions
Optional Item
Console cable-RJ-45 to DB-9
NOTE:
Other documentation including the Quick Start Guide and CLI Reference Guide can be accessed on the NXA-ENET8-POE+
product page at www.amx.com.
Switch Installation Tasks
Follow these tasks to install the switch in your network. For full details on each task, go to the relevant chapter or section by
clicking on the link.
CAUTION:
Before installing your switch, first review all the safety statements and guidelines in the Regulatory and Safety
Information document.
Unpack Package and Check Contents
Unpack your switch and check the package contents to be sure you have received all the items. See
page 23 for more information.
Install the Chassis
The switch is designed to be installed in a standard 19-inch equipment rack. Plan your rack installation and install the switch
chassis in the rack. Be sure to take into account switch cooling requirements.
See the
section on page 25 for more information.
1.
Attach the brackets to the switch.
2.
Use the screws supplied with the rack to secure the switch in the rack.
FIG. 2
Installing the Switch in a Rack