Basic Administration Protocols
197
Instruction Manual - NXA-ENET8-POE+
Displaying LLDP Remote Device Information
Use the Administration > LLDP (Show Remote Device Information) page to display information about devices connected directly to
the switch's ports which are advertising information through LLDP, or to display detailed information about an LLDP-enabled device
connected to a specific port on the local switch.
The following table lists the options on this page:
FIG. 227
Displaying Local Device Information for LLDP (Port Details)
Administration - LLDP Options
Port
Local Port
The local port to which a remote LLDP-capable device is attached.
Chassis ID
An octet string indicating the specific identifier for the particular chassis in this system.
Port ID
A string that contains the specific identifier for the port from which this LLDPDU was transmitted.
System Name
A string that indicates the system's administratively assigned name.
Port Details
Port
Port identifier on local switch. (Range: 1-10/26/28/52)
Remote Index
Index of remote device attached to this port.
Local Port
The local port to which a remote LLDP-capable device is attached.
Chassis Type
Identifies the chassis containing the IEEE 802 LAN entity associated with the transmitting LLDP
agent. There are several ways in which a chassis may be identified and a chassis ID subtype is used
to indicate the type of component being referenced by the chassis ID field. (See
Chassis ID
An octet string indicating the specific identifier for the particular chassis in this system.
System Name
A string that indicates the system's assigned name.
System Description
A textual description of the network entity.
Port Type
Indicates the basis for the identifier that is listed in the Port ID field. See
Port Description
A string that indicates the port's description. If RFC 2863 is implemented, the ifDescr object should
be used for this field.
Port ID
A string that contains the specific identifier for the port from which this LLDPDU was transmitted.
System Capabilities Supported
The capabilities that define the primary function(s) of the system. (See
System Capabilities Enabled
The primary function(s) of the system which are currently enabled. (See
Management Address List
The management addresses for this device. Since there are typically a number of different
addresses associated with a Layer 3 device, an individual LLDP PDU may contain more than one
management address TLV.
If no management address is available, the address should be the MAC address for the CPU or for
the port sending this advertisement.
Port Details - 802.1 Extension Information
Remote Port VID
The port's default VLAN identifier (PVID) indicates the VLAN with which untagged or
priority-tagged frames are associated.
Remote Port-Protocol VLAN List
The port-based protocol VLANs configured on this interface, whether the given port (associated
with the remote system) supports port-based protocol VLANs, and whether the port-based
protocol VLANs are enabled on the given port associated with the remote system.
Remote VLAN Name List
VLAN names associated with a port.